PREAMPLIFIER SECTION
LINE INPUT, PRE-OUT (ANALOG BYPASS ON)
THD (20Hz - 20kHz) <0.002 % at 2 V out
Signal-to-Noise Ratio >106dB (IHF; A-weighted, ref. 500 mV out, unity gain)
Channel separation >100dB (1 kHz); >90 dB (10 kHz)
Input Impedance (R and C) 56 kohms + 100 pF
Maximum input signal >4.6 Vrms (ref. 0.1 % THD)
Output impedance Source Z + 320 ohms
Input sensitivity 65mV (ref. 500 mV out, Volume maximum)
Frequency response ±0.3 dB (20 Hz – 20 kHz)
Maximum voltage output -IHF load >>5 V (ref. 0.1 % THD)
PHONO INPUT, PRE-OUT (ANALOG BYPASS ON)
THD (20Hz - 20kHz) <0.01% at 2 V out
Signal-to-Noise Ratio >84dB (200 ohms source; A-weighted, ref. 500 mV out)
Input sensitivity 46 kohms/100 pF
Frequency response ±0.3 dB (20 Hz – 20 kHz)
Maximum input signal at 1kHz >80 mVrms (ref. 0.1 % THD)
LINE INPUT, HEADPHONE OUT (ANALOG BYPASS ON)
THD (20Hz - 20kHz) <0.005% at 1V out
Signal-to-Noise Ratio >107 dB (32 ohms loads; A-WTD, ref. 1V out, unity gain
Frequency response ±0.3 dB (20 Hz – 20 kHz)
Channel separation >62 dB at 1kHz
Output impedance 2.2 Ohms
LINE IN, SPEAKER OUT (ANALOG BYPASS ON)
Continuous output power into 8 ohms and 4 ohms 2 x 130W
THD (20 Hz – 20 kHz) <0.02% (250 mW to 130 W, 8 ohms and 4 ohms)
Signal-to-Noise Ratio >95 dB (A-weighted, 500 mV input, ref. 1 W out in 8 ohms)
Clipping power 150W
IHF dynamic power 210W into 8 ohms
300W into 4 ohms
350W into 2 ohms
Peak output current >26A (in 1 ohm, 1ms)
Damping factor >150 (ref. 8 ohms, 20Hz to 6.5kHz)
Frequency response ±0.3 dB (20 Hz – 20 kHz)
Channel separation >90dB (1 kHz)
>75dB (10 kHz)
Input sensitivity (for 130 W in 8 ohms) Line In: 201 mV, Digital In: 10.25% FS
GENERAL SPECIFICATIONS
Supports bit rate/sample rate up to 32 bit/384 kHz
Frequency band 2.402GHz- 2.480GHz
Maximum transmit power (dBm) 7 dBm ± 2 dBm
DIMENSIONS AND WEIGHT
Gross dimensions (W x H x D) 435 x 100 x 390mm (17.1 x 3.9 x 15.4“)
Net Weight 8.7kg (19.1lb)
Shipping weight ~11kg (24.2lb)

nadelectronics.com/product/c-389-hybrid-digital-dac-amplifier/